impro XTT901-1-0-GB Series Installation Manual

I
ImproX (MMA) 125 kHz Mullion Antenna Reader
SPECIFICATIONS
Working Environment .................
Buzzer
Volume and Tone ...................
Status Indicators
Status LED .............................
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Antenna Reader:
An ImproX MMA Antenna Reader housed in a Dark Grey, ABS Plastic housing.
The ImproX MMA consists of a Front Cover and a Backing Plate. The Front Cover
(including the potted electronic components) assembly includes 8 m (26 ft) of 4-
core, 0.5 mm solid strand Communications Cable.
Four countersunk, Brass Wood Screws (3.5 mm x 25 mm).
Four Wall Plugs (7 mm).
An extra Serial Number Label.
General
Remember the following when installing the Antenna Reader:
Maximum Data Communications Distance
The ideal cable distance between the Terminal, Controller or Receiver and its Antenna
Reader ranges between 2 m to 16 m (7 ft to 53 ft). Achieve this by using a good quality
shielded multi-strand 3-pair twisted cable. The cross-sectional area of the cable must
not be less than 0.2 mm
MPRO
INSTALLATION MANUAL
2 2
(0.0003 in ).
MODEL NUMBER: XTT901-1-0-GB-XX
X MMA
Designed to work in an indoor or outdoor
environment similar to IP66. The ImproX MMA
is, therefore, sealed (potted) against water.
No Buzzer.
Bi-coloured Red or Green.