impro XTT908-1-0-GB Series Installation Manual

I
ImproX (DPA) 125 kHz Door Entry Panel Antenna Reader
SPECIFICATIONS
Working Environment .................
Buzzer
Volume and Tone ...................
Status Indicators
Status LED .............................
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Antenna Reader:
An ImproX DPA Antenna Reader housed in a Black, ABS Plastic housing. The
ImproX DPA includes 8 m (26 ft) of 4-core, 0.5 mm Solid Strand Communications
Cable.
A Piezo-electric, External Drive Buzzer.
An extra Serial Number Label.
General
Remember the following when installing the Antenna Reader:
Maximum Data Communications Distance
The ideal cable distance between the Terminal, Controller or Receiver and its Antenna
Reader ranges between 2 m to 16 m (7 ft to 53 ft). Achieve this by using a good quality
shielded multi-strand 3-pair twisted cable. The cross-sectional area of the cable must
not be less than 0.2 mm
MPRO
INSTALLATION MANUAL
Designed to work in an indoor or outdoor
environment similar to IP66. The ImproX DPA
is, therefore, sealed (potted) against water.
Single tone, 4-step adjustable volume.
Bi-coloured Red or Green.
2 2
(0.0003 in ).
MODEL NUMBER: XTT908-1-0-GB-XX
X DPA