Table of Contents
Advertisement
4. Never use more than one jack to lift the fork lift truck. Failure to
observe this instruction may lead to unstable conditions and could
cause failure of one of the jacks.
5. Do not use the HFJ-400 to raise all for 4 wheels of the fork lift from
the floor. Two wheels of the lift truck must remain in contact with the
floor at all times.
6. Do not push the jack under the
fork lift beyond the red line
marked on the decal on the top
of the lift arm. This will maintain
at least one inch clearance
between the body of the jack
and the fork lift in its raise
position.
these instructions could result in
damage to the HFJ-400 and/or
loss of load.
7. Do not use any kind of "cribbing"
under the HFJ-400, or on top of
the lift pad area. The jack must
always remain in direct contact
with the floor, and the lifting pad
or notch must be in direct
contact with the fork lift.
www.dominga.lt/krautuvai mob. tel.: +370 686 61770 tel.: +370 5 2432146 el. paštas: pakrovejai@dominga.lt
Failure
to
observe
9
Fig.7
Fig.8
Advertisement
Table of Contents
