Advertisement
STEP 3
STEP 4
STEP 5
Set the switch to "Internal Load"
IMPORTANT: Do NOT turn on the
amplifier without a speaker plugged
in!", when in 8 or 16 Ohm setting.
Make sure you set the switch in the
back to Normal; if you don't set it to
"Normal" the bias will not be the true
reading.
A) Lower the volume.
B) Unplug your guitar cord from the
input of the amp.
NOTE: If you have signal going
through the amp, it will not be the
true reading, when you set the bias.
- 3 -
Advertisement
