Advertisement
SPEAKER CONNECTION
When connecting the amplifier to the speaker enclosure,
make sure to set the impedance selector switch on the rear
of the unit to the impedance that matches your enclosure.
When two enclosures of equal impedance are used, set the
switch to one half the impedance of one enclosure (e.g. two
16 ohm enclosures: set switch to 8 ohms; two 8 ohm
enclosures: set switch to 4 ohms). The 5150 is designed to
operate into a minimum of 4 ohms.
RACK MOUNT EFFECTS UNIT
FROM 5150
EFFECTS SEND
OUTPUT TO INPUT OF
RACK EFFECTS UNIT
BACK PANEL
EFFECTS
PATCHING
USING THE EFFECTS
LOOP TO PATCH
FROM OUTPUT OF
EXTERNAL, NON
RACK EFFECTS UNIT
GAIN PRODUCING
TO 5150 EFFECTS
EFFECTS DEVICES
RETURN
NPUT
(DIGITAL DELAY,
REVERB, CHORUS,
EFFECT(S) ARE
ETC.)
FOOTSWITCH (See
section on REMOTE
FOOTSWITCH JACK)
Features and specifications subject to change without notice.
BACK PANEL
1
8 OHMS
SET SWITCH
TO 4 OHMS
8 OHMS
FROM OUTPUT OF
EFFECTSPEDAL
ND
NPUT OF
TO 5150 EFFECTS
DAL
RETURN INPUT
Advertisement
