Download Print this page

INDU+ 00I.DP8.5GH Assembly Instructions Manual

High lid gazzgrill

Download this manual

HIGH LID GAZZGRILL

ASSEMBLY INSTRUCTIONS

REF. 00I.DP8.5GH

Page 1 HIGH LID GAZZGRILL ASSEMBLY INSTRUCTIONS REF. 00I.DP8.5GH...
Page 2: Part List
Assembly WARNING: Whilst every effort has made during manufacture to remove any sharp edge, you should handle all components with care to avoid accidental injury. Tools required: Either a Philips crosshead or flat-bladed screwdriver and either a spanner (we have supplied a multifunction spanner) or a pair pliers.
Page 3 ASSEMBLY 1. Dis assemble the lid’s left and right stopper of the gazzgrill. Take off the screw from the hinge of the lid 2. Take off the original lid of the gazzgrill.
Page 4 3. Use the hooks to place the gazzgrill in and out of the trolley. 4. Install the windshield onto the firebox. Place the left panel ( 3x screw type M6 )
Page 5 Place the right panel (3x screw type M6 ) Place the backside panel ( 6x screw type M5) 5. Place the high lid onto the windshield and tight up. ( 2x screw type M6).
Page 6 6. Install the warming rack. 7. The high lid is installed for use.
Page 7: Cleaning And Care
It is recommended to use protective gloves (eg oven gloves) when handling particularly hot components. CLEANING AND CARE CAUTION: All cleaning and maintenance should be carried out when the barbecue is cool and with the fuel supply turned OFF at the gas cylinder. CLEANING “Burning off”...