Remote Control Functions - Nokia 50UHDADNDT8P Manual

Chapter 1
Note: The pictures are only for reference.
How to pair remote control with TV via wireless connectivity

Remote control functions

Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.
Short press it to turn the TV to standby mode and press again
to turn on the TV, long press it to select "Power off" or "Restart" the TV.
To mute and un-mute the sound.
Goes to the smart TV homepage.
Enter into Quick Access Menu.
Note: Only available for external input mode.
(up, down, left and right direction buttons) Highlights different items
in the menu system and adjusts the menu controls.
OK, Confirms your selection.
Exit the menu and return to the previous menu.
To enter source selection interface.
（Mic）Click to interact with Google Assistant of the TV.
Note: Available only when the network and wireless connectivity is normal.
+/-
Increases or decreases the TV's volume.
To Enter into virtual keyboard.
Note: Only available for external input mode.
To enter SMART function interface.
Enter into using TV System menu.
Goes to the NETFLIX homepage.
Goes to the YouTube homepage.
Goes to the Google Play homepage.
Goes to the prime video homepage.
This is an infrared remote control with wireless connectivity intergrated,
before using voice control, please pair it with the TV firstly.
The following steps are for your reference:
Step 1: Press
Step 2: Press
Step 3: Follow the " Settings tips page " , Press OK and
Step 4: When the pairing is finished, the screen will display " Success ! ".
Note: if it can' t pair successfully for 2 minutes, please repeat
the above steps for pairing again.
If you want to unpair the wireless connectivity remote, follow the steps below:
Step 1: Press
Step 2: Press
Step 3: Press
the wireless connectivity remote name to enter next steps.
Step 4: Press unpair and then choose OK button.
button to enter the home page.
button to enter the " RC pairing ".
button to enter the home page.
to choose , and then press OK to enter.
▲/▼ ◄/►
to select " Remotes & Accessories " and then to choose
11
Introduction
together.