Lemania Energy FLASH Series User Manual page 6

5 FOLLOW THESE STEPS WHEN THE BATTERY IS OUTSIDE THE VEHICLE.
WARNING: SPARKS NEAR A BATTERY MAY CAUSE EXPLOSIONS.
Check the polarity of the battery terminals. (+ / -)
5.1
Connect the Positive clamp to the Positive battery terminal.
5.2
Position yourself as far away from battery as possible and connect the Negative clamp to the Negative battery terminal.
5.3
Do not face the battery when completing the connections.
5.4
Connect the AC supply cable to the electric socket and turn the charger on.
5.5
When disconnecting the charger, complete the steps in reverse.
5.6
OPERATING INSTRUCTIONS
1 BROWSING THE MAIN INTERFACE
2 MAIN INTERFACE MODE
The device provides 5 Main Interface with the following modes:
SETTINGS MODE
Press
Press
CHARGE MODE SHOWROOM MODE
to enter the Main menu or return to the previous menu.
to cycle between the various modes and settings
DIAGNOSTIC MODE
6
TEST MODE