Table of Contents
Advertisement
7.
Install the bottom hinge bearing on
the opposite side of the door (see
Figure 8C).
8. Flip the door closer over and install
on the opposite side of the door
(see Figure 8C).
B
A
Door Bottom
Figure 8
9. Repeat steps 1-8 for the freezer door.
10. Lower the refrigerator door in the
opened position on the bottom
hinge pin and close the door (see
Figure 9).
2
1
Figure 9
11. Screw in and tighten the center hinge
pin using an adjustable wrench.
12. Lower the freezer door in the opened
position over the center hinge pin
and close the door (see Figure 10).
2
1
Figure 10
Door Closer
C
DOOR REMOVAL
Place the lower hinge cover between
the freezer door and refrigerator
door to keep it level while attaching
the top hinge (see Figure 11).
Figure 11
13. Attach the top hinge using a 5/16 in.
socket, and then place the top hinge
cover (some models) on the unit
(see Figure 12).
Figure 12
14. For models without the hinge cover,
flip the hinge cover over and attach it
using a 5/16 in. socket (see Figure 13).
Figure 13
15. Replace the lower hinge covers.
11
Advertisement
Table of Contents
