Frigidaire FFRE103WA1 Use & Care Manual page 9

Operating Instructions
(continued)
DRY MODE:
SLEEP FEATURE:
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation. The LED
(light) will illuminate after 250 hours of operation. To reset
after cleaning the filter, press the "Filter Reset" button and
the light will go off.
2 0 0 9 E e l t c o r u l x H o m e P o r
DO THIS:
PRESS
MODE BUTTON
CHOOSE DRY
DO THIS:
PRESS
SLEEP BUTTON
d u t c , s n I . c
Operating Instructions
YOU WILL SEE:
Note: In this mode, the air conditioner will work like a
dehumidifier, but it will cool the room down meanwhile. The
temperature can be adjusted between 62 °F (17 °C) and 86 °F
(30 °C) and fan speed will be held at "Lo".
YOU WILL SEE:
Note: In this mode, the unit will select Auto fan speed
automatically, and the selected temperature will increase by 2
°F 30 minutes after the mode is selected. The temperature
will then increase by another 2 °F after an additional 30
minutes. This new temperature will be maintained for 7 hours
before it returns to the originally selected temperature. This
ends the "Sleep" mode and the unit will continue to operate
as originally programmed. The "Sleep" mode program can be
cancelled at any time during operation by again pressing the
"Sleep", "Fan speed" or "Mode" button.
DO THIS:
PRESS FILTER
RESET BUTTON
l A r l g i h s t r s e r e e v . d 9