Advertisement

Quick Links

Instructions when using for the first time
1.
Inserting the batteries
2.
Taking photographs
3.
Viewing photographs and video clips
4.
Connecting the camera to a computer
Layout of the instruction manual
Inserting the batteries and function explanation (4, 5)
Normal camera operation
Other functions and operation
Installation and using the software
Use with a Macintosh
Troubleshooting
1
1
Introduction
Introduction
This instruction manual is for users of the TRUST 760 POWERC@M CCD. This
This instruction manual is for users of the TRUST 760 POWERC@M CCD. This
camera has a CCD lens to guarantee sharp images. The camera has a maximum
camera has a CCD lens to guarantee sharp images. The camera has a maximum
resolution of 4 Megapixles.
resolution of 4 Megapixles.
The camera's LCD screen gives a clear display of the photographs and video clips.
The camera's LCD screen gives a clear display of the photographs and video clips.
1.1
1.1
General comments regarding photography
General comments regarding photography
Test photograph
Test photograph
Before you start photographing a unique event, it is a good idea to first take a number
Before you start photographing a unique event, it is a good idea to first take a number
of test photographs. This will help to ensure that the camera works as required.
of test photographs. This will help to ensure that the camera works as required.
No compensation for unsuccessful photographs
No compensation for unsuccessful photographs
No compensation may be claimed for unsuccessful photographs as a result of a
No compensation may be claimed for unsuccessful photographs as a result of a
faulty camera, faulty software, etc.
faulty camera, faulty software, etc.
Exchanging photographs and video clips
Exchanging photographs and video clips
No guarantees are given that photographs and video clips produced with this camera
No guarantees are given that photographs and video clips produced with this camera
can be displayed on other devices or that photographs and video clips produced with
can be displayed on other devices or that photographs and video clips produced with
other devices can be displayed using this camera.
other devices can be displayed using this camera.
Sunlight
Sunlight
Do not aim the camera directly at the sun for a long period of time. This may damage
Do not aim the camera directly at the sun for a long period of time. This may damage
the sensor.
the sensor.
Shaking/knocks
Shaking/knocks
Do not shake the camera or knock it against anything, because this may cause a
Do not shake the camera or knock it against anything, because this may cause a
fault, unsuccessful photographs, memory incompatibility or the loss of photographs
fault, unsuccessful photographs, memory incompatibility or the loss of photographs
from the memory.
from the memory.
LCD screen
LCD screen
There may sometimes be small black or clear dots visible on the LCD screen. This is
There may sometimes be small black or clear dots visible on the LCD screen. This is
normal and does not affect the photographs. There is no reason to exchange the
normal and does not affect the photographs. There is no reason to exchange the
camera if there are 10 dots or less.
camera if there are 10 dots or less.
Exposing the LCD screen to direct sunlight for a long period of time may cause faults.
Exposing the LCD screen to direct sunlight for a long period of time may cause faults.
Lens
Lens
TRUST 760 POWERC@M CCD
Chapter
!
(4)
(6)
(7)
U K
(8)
Chapter
(6 to 8)
(9 to 14)
(15 to 18)
(19)
(20)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 760 and is the answer not in the manual?

Questions and answers

Summary of Contents for Trust 760

  • Page 1 Introduction Introduction This instruction manual is for users of the TRUST 760 POWERC@M CCD. This This instruction manual is for users of the TRUST 760 POWERC@M CCD. This camera has a CCD lens to guarantee sharp images. The camera has a maximum camera has a CCD lens to guarantee sharp images.
  • Page 2 Safety Carefully read the following instructions before use. The TRUST 760 POWERC@M CCD does not require any special maintenance. Use a slightly damp, soft cloth to clean the camera. Do not use aggressive substances, such as white spirit, to clean the device.
  • Page 3: Inserting/Removing The Batteries

    TRUST 760 POWERC@M CCD Inserting/removing the batteries Follow the instructions given below to insert or remove the batteries Note: Make sure the camera is turned off. Open the battery cover (1, figure 3) on the bottom of the camera by sliding it in the direction indicated by the arrow and folding it open.
  • Page 4 TRUST 760 POWERC@M CCD Explanation of the camera functions Functions on the top of the camera (see figure 1). Point Description Function Exposure button Press this button to take a photograph. This button is also used to start and stop recording a video clip.
  • Page 5 TRUST 760 POWERC@M CCD Point Description Function the digital zoom is used. On/Off switch Turns the camera on and off. Menu button Opens the menu. Wrist strap fixing point Eye for fixing the wrist strap to the camera. Control button Button for scrolling through the menu.
  • Page 6: Taking Photographs

    Windows 2000 / Windows XP Note: If you use a Macintosh, you can ignore this chapter and continue from chapter 8.2. Note: The latest driver can be downloaded from www.trust.com/13792. Check whether a new driver is available and use this for the installation.
  • Page 7 Select 'Run' from the Windows Start menu. b Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software Installer. The Trust Software Installer window will appear (see figure 8). Select the language (in the top right-hand corner) you wish to use for the installation.
  • Page 8: Symbol Function

    TRUST 760 POWERC@M CCD Double-click on the ‘100MEDIA’ folder. The recordings are saved in this folder. Double-click on a file to open or edit it. Other functions and operating the camera General functions Rotary button The camera can be set to a certain mode using the rotary button (2, figure 1).
  • Page 9: Attaching The Wrist Strap

    10.2 Using the macro function (close-up photographs) The Trust 760 PowerC@m CCD has a macro function which can be used to take photographs at a minimum distance of 18 cm. You can use the ‘Portrait’ option to take close-up photographs.
  • Page 10: Automatic Exposure

    TRUST 760 POWERC@M CCD Standard mode Distance: 130 cm to infinity. Portrait mode Distance: 80 – 130 cm The macro symbol will be displayed in the bottom left-hand corner of the LCD screen when this mode is selected using the lens ring.
  • Page 11 TRUST 760 POWERC@M CCD Automatic flash with red-eye reduction. The flash will work automatically when there is insufficient light. An extra flash will be given to avoid the red-eye effect. Synchronization of a low shutter time (Night Scene). The flash works with a low shutter speed to produce the correct lighting. It is recommended to use the stand.
  • Page 12 TRUST 760 POWERC@M CCD Symbol on the Point Options screen Comments Resolution 2272 x 1704 Sets the resolution for taking a (XL) photograph (see chapter 10.5.1). (Image Size) (2272 x 1704 = 4 Megapixel1600 x 1600 x 1200 (L) 1200 = 2 Megapixel 1280 x 960 (M) 1280 x 960 = 1.3 Megapixel...
  • Page 13: White Balance

    TRUST 760 POWERC@M CCD Resolution 2272 x 1704 1600 x 1200 1280 x 960 640 x 480 (XL) Quality Super Fine Fine Normal Table 11: Number of photographs that can be saved in the camera’s internal memory 10.5.3 Exposure You can adjust the exposure to underexpose or overexpose photographs. This will make darker objects lighter or objects which are brightly lit less bright.
  • Page 14: Displaying Thumbnails

    TRUST 760 POWERC@M CCD A video recording can be made in both the normal mode or the macro mode (see chapter 10.2). Note: ‘Low light!’ is displayed on the LCD screen when there is insufficient light. Improve the lighting conditions or record a video clip in a different location.
  • Page 15: Menu Settings

    TRUST 760 POWERC@M CCD 12.2 Menu settings The following settings can be altered in the menu when the camera is in the ‘Playback’ mode: Delete, Slide show and Protect. Set the camera to the ‘Playback’ mode. Press the ‘Menu’ button.
  • Page 16: Slide Show

    TRUST 760 POWERC@M CCD Select ‘Format’. Select ‘Yes’ to format the memory. Select ‘No’ to cancel the formatting. Note: All the photographs and video clips will be deleted when the memory is formatted, included the photographs and video clips protected against being deleted.
  • Page 17: Inserting/Removing A Memory Card

    Table 13: Settings Inserting/removing a memory card The Trust 760 PowerC@m CCD has an 8 MB internal memory. By default, photographs and video clips are saved in the internal memory. This memory can be increased by using a SD (Secure Digital) memory card. The photographs and video clips are automatically saved on the memory card when one has been inserted into the camera.
  • Page 18: Formatting The Memory

    TRUST 760 POWERC@M CCD Insert the memory card into the camera as indicated in the battery compartment (see figure 7). Press the memory card into the slot until it clicks into place. Remove the memory card by pushing it so that the lock is released. Remove the memory card from the camera Close the battery cover.
  • Page 19 The conditions can be found at www.trustphotosite.com. 15.1 Installing the Trust Photo Upload software This software can be used to upload your photographs to the Trust Photo Site. Note: The latest version of the Trust Photo Upload software can always be downloaded from the Trust website.
  • Page 20: Installation

    Explorer to select photographs, unselect photographs, view photographs, etc. Click on ‘Upload’. Enter your e-mail address and the password for your Trust registration (not the password for your e-mail account). Click on ‘Next’. Your login information will be checked. This may take some time.
  • Page 21: Ulead Cool 360

    Ulead’s Mira’ window may also appear. Click on the 'Skip for now' button to close these windows if they appear. The Trust camera will be visible as a ‘Removable disk’ in the list on the left- hand side of the window. (Click on My Computer.) Open the ‘100MEDIA’...
  • Page 22: Other Programs

    TRUST 760 POWERC@M CCD Click on Start – Programs - Ulead Cool 360 – Ulead Cool 360’ (see figure 11). Click on ‘Start’ and then on ‘New Project’ (right). A Wizard will appear. Select the type of project (full 360 or widescreen).
  • Page 23 Click on ‘Install’. The files will now be copied to your hard drive. This may take some time. ‘Finished’ will then appear. Click on ‘Quit’ to complete the installation. The ‘Trust 760 PowerC@m CCD’ folder will appear. Double-click on ‘PEX 2.0’ to install Ulead Photo Explorer.
  • Page 24: Troubleshooting

    Hard disk controllers – Trust 760 PowerC@m CCD (Win 98) Hard disk controllers – USB Mass Storage Device (Win 98) Disk drives – Trust 760 PowerC@m CCD USB Device (Win 2000, XP) Storage volumes – Generic Volume (Win 2000, XP) Universal Serial Bus controllers –...
  • Page 25 TRUST 760 POWERC@M CCD installed or locations other than the default locations have been selected). Note: Deviations may also occur as a result of using new drivers available on the Internet. Note: The location or name may vary in the Control Panel for different operating systems.
  • Page 26 TRUST 760 POWERC@M CCD Problem Cause Possible solution The macro switch is Set the macro switch to the correct set to the wrong setting. setting. The automatic Turn the automatic exposure No photograph is exposure function is function off. taken when the still turned on.
  • Page 27: Warranty Conditions

    Troubleshooter. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information at the back of this instruction manual. Please have the following information available: •...

Table of Contents