Download
Share
Print this page
Montezuma M3DWK Owner's Manual
  1. Manuals
  2. Brands
  3. Montezuma Manuals
  4. Desktop
  5. M3DWK
  6. Owner's manual

Montezuma M3DWK Owner's Manual

3-door workstation
Hide thumbs

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
3-DOOR
WORKSTATION
M3DWK
www.montezumastorage.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the M3DWK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Montezuma M3DWK

Summary of Contents for Montezuma M3DWK

  • Page 1 OWNER'S MANUAL 3-DOOR WORKSTATION M3DWK www.montezumastorage.com...
  • Page 2 LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized.

  • Page 3: Specifications

    SPECIFICATIONS OVERALL DIMENSIONS: 77.6 cm W x 49 cm D x 206.6 cm H (30-1/2" W x 19-1/4" D x 81-3/8" H) 1 x 1-DOOR WALL CABINET DIMENSIONS: 77.6 cm W x 30.5 cm D x 51 cm H (30-1/2" W x 12" D x 20" H) MAXIMUM SHELF WEIGHT: 23 kg (50 lb) 2 x PEGBOARD PIECES...

  • Page 4: Parts List

    PARTS LIST The keys are taped inside the cabinets.
  • Page 5 REF DESCRIPTION PART NUMBER M6 x 16 mm Hex Socket Head Screw 320327 Washer 324050 M6 x 65 mm Hex Tapping Screw 320316 Gas Strut 303002 End Cover 314195 Shelf 233955 Shelf 121418 Shelf Support 226078 Lock and Key (001) 304178 M6 Hex Flange Nut 323085...
  • Page 6 M6 x 16 mm Hex Socket Head Screw 8 for attaching top panel of wall cabinet 11 for attaching bottom panel of wall cabinet 4 for attaching worktop to base cabinet 11 for attaching bottom panel of base cabinet 18 for attaching pegboards and wall cabinet to posts 2 for attaching unit to other units M6 x 65 mm Hex Washer...
  • Page 7 Worktop Magnet Adjustable Feet Pre-installed For attaching to top For attaching of base cabinet to bottom panel For keeping doors closed Post A Post B Pegboard Top and bottom posts Middle post in in each stack each stack For hanging tools...
  • Page 8 ASSEMBLY BASE CABINET ASSEMBLY Carefully separate the front and back panels of the base cabinet, allowing the side panels to unfold completely. Make sure the unit is upside down. Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down.
  • Page 9 Attach the bottom panel using eleven M6 x 16 mm hex socket head screws. Screw the four adjustable feet into the cabinet bottom. Turn the cabinet upright.
  • Page 10 Attach the worktop to the base cabinet using four M6 x 16 mm hex socket head screws.
  • Page 11 Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports. WARNING: DO NOT STACK A 2-DOOR BASE CABINET ON TOP OF ANOTHER CABINET.
  • Page 12 WALL CABINET ASSEMBLY Carefully separate the front and back panels of the wall cabinet, allowing the side panels to unfold completely. Make sure the unit is upside down. Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down.
  • Page 13 Attach the bottom panel using eleven M6 x 16 mm hex socket head screws. Turn the cabinet back to the upright position. Attach the top panel using eight M6 x 16 mm hex socket head screws.
  • Page 14 Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports.
  • Page 15 PEGBOARD BACK WALL ASSEMBLY Attach two A posts to the back of the base cabinet using three M6 x 16 mm hex socket head screws per post.
  • Page 16 Slide two B posts fully onto the A posts. Place one pegboard on the front, making sure the grommet hole is on the bottom. Attach using two M6 x 16 mm hex socket head screws per post.
  • Page 17 Slide two A posts onto the B posts. Make sure to leave enough room at the top for the wall cabinet. Place one pegboard on the front, making sure the grommet hole is on the top. Attach using two M6 x 16 mm hex socket head screws per post.
  • Page 18 Insert two M6 x 16 mm hex socket head screws into the top holes of the wall cabinet, but do not fully tighten. Hang the wall cabinet on the top of the posts, then fully tighten the screws. Attach the bottom of the wall cabinet to the posts using two additional M6 x 16 mm hex socket head screws.

  • Page 19: Installation

    INSTALLATION If you have purchased other units, assemble them now, then put all units together to build your garage. For a better appearance, attach the sides of each unit together using M6 x 16 mm hex socket head screws and M6 hex flange nuts at both top and bottom.
  • Page 20 Hide holes on the exterior ends of the units with the supplied end covers, if necessary.
  • Page 21 For safety, secure the tops of the each unit to the wall using M6 x 65 mm hex tapping screws and washers. Use three M6 x 65 mm hex tapping screws and washers on wall cabinets and three M6 x 65 mm hex tapping screws and washers on base cabinets. For best results, mount to studs or other solid surfaces.

  • Page 22: Maintenance

    MAINTENANCE Periodically clean the door fronts, trim, and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY Use two people to move the units into place. Failure to do so can result in back or other injuries.
  • Page 23 This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you.
  • Page 24 Manufactured by: QUALITY CRAFT Surrey, BC, Canada V3S 5N4 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.com M3DWK-EN/FR-06/19...

This manual is also suitable for:

Bkm3dwk