Table of Contents
Advertisement
Repeat playback modes (Repeat 1 / Repeat all)
Repeat the Current Track
During playback, press the REPEAT button once to repeat the current CD track.
Repeat All Tracks
During playback, press the REPEAT button twice to repeat the entire album.
Return to normal playback
Press the REPEAT button until NO repeat indicator is displayed. The normal playback
will be resumed.
Programmed CD playback
This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc
onto the CD compartment (without pressing the "PLAY/PAUSE" button)
1. Press PROGRAM button once in the stop mode. "P01" will be shown on the display
and blinking.
2. Press the SKIP buttons to select the desired track to be programmed.
3. Press PROGRAM button again to save the selected track/files.
4. Repeat steps 2-3 to program up to 20 tracks.
5. Press the PLAY/PAUSE button to play the programmed tracks after programming is
completed. The "PROG" indicator will lit.
6. To clear program and resume normal playback, press the STOP button twice during
playback, or open the CD door, or change to next mode to clear the programmed tracks.
Remark:
The unit can store up to 20 tracks in the programmable memories. During the
programmed playback, user can still select the "repeat 1 / repeat all" functions.
1. If the unit has never been paired with a Bluetooth device before, you need to follow the
pairing instructions below to link the SRCD268BT with your Bluetooth device.
Press the
•
•
Press and toggle the FUNCTION button to select Bluetooth mode. The unit will
search the paired device with the "BLUETOOTH" Indicator lit.
•
Press and hold the STOP/PAIR Button for 4~5 seconds. Then the "BLUETOOTH"
Indicator is flashing, the unit will goes into Pairing/Discoverable mode.
•
Turn on the Bluetooth function of your Bluetooth device and enable the search or
scan function to find the unit.
•
Select "SRCD268BT" from the device list when it appears on your device screen. If
required, enter the pass code "0000" to pair (link) the unit with your device.
•
After successfully pairing (linking) the Bluetooth enabled device the "BLUETOOTH"
Indicator steadily and a short beep will heard.
Note: If you can't pair the unit with your Bluetooth enabled device, you can try to turn Off &
On the power of your unit to solve the problem.
CD Operation-Continued
Bluetooth Operation
button to turn on the unit.
9
Advertisement
Table of Contents
