Installation Instructions - Danby DPA060BACBDB Owner's Use And Care Manual

Installation Instructions

LOCATION
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fi t most standard vertical and horizontal window applica-
tions, however, it may be necessary for you to modify some aspects of the installation procedures for
certain types of windows.
Visit www.danby.com for general instruction videos.
Press the exhaust hose into the window slider
adapter and unit adapter. The adapters will auto-
matically clamp to the exhaust hose using internal
elastic buckles.
Slide the exhaust hose unit adapter into the air
outlet opening in the direction of the arrow.
Measure the window opening where the win-
dow kit will be installed and extend the sliders
to match the measurement. If the legth of the
window opening requires three window sliders,
use the bolt to fasten the sliders at the proper
length.
If the window opening is less than the mini-
mum length of the window slider kit, use the
single slider that has the hole in it and cut it
to the correct size. Ensure that you do not cut
the end of the slider that has the hole in it, this
will ne necessary to attach the exhaust hose
assembly.
• The air conditioner should be placed on a fi rm foundation to
minimize noise and vibration. For safe and secure positioning,
place the unit on a smooth, level fl oor strong enough to sup-
port the unit.
• The unit has casters to aid placement, but it should only be
rolled on smooth, fl at surfaces. Use caution when rolling on
carpeted surfaces. Use caution and protect fl oors when rolling
over wood fl oors. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated
grounded socket.
• Never place any obstacles around the air inlet or outlet of the
unit.
• Allow at least 30 cm of space away from the wall for effi cient
air conditioning.
9