Error Message Appears On A Pictbridge Compliant Device - Canon PIXMA MP610 Series Quick Start Manual

Error No.: 1856 Is Displayed
Cause
Inner Cover was opened while printing
was in progress.
Error No.: 2001 Is Displayed
Cause
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
camcorder is not compatible with this
machine.
Error No.: 2002 Is Displayed
Cause
An unsupported USB hub is connected. See "An unsupported USB hub is connected. Remove the hub." in "An Error
Error No.: 2500 Is Displayed
Cause
Automatic Print Head Alignment has
failed.
Error Message Appears on a PictBridge Compliant
Device
The following are the possible errors that may occur when printing directly from a PictBridge
compliant device, and the actions to resolve them.
Note
This section describes errors that are indicated on Canon-brand PictBridge compatible device. The
error messages and operations may vary depending on the device you are using.
For errors on non-Canon PictBridge compliant devices, check the error message displayed on the LCD
and take the appropriate action to clear the error. For details, see "An Error Message Is Displayed on
the LCD" on page 70.
For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.
88 Troubleshooting
Close the Inner Cover, then press the OK button on the machine.
A page of print data being sent at the time of the error will be erased, so print
that page again.
See "The device may be incompatible. Remove the device and check the
manual supplied with the connected device." in "An Error Message Is Displayed
on the LCD" on page 71.
Message Is Displayed on the LCD" on page 72.
See "Auto head align has failed. Press OK and repeat operation. <See
manual>" in "An Error Message Is Displayed on the LCD" on page 71.
Action
Action
Action
Action