Table of Contents
Advertisement
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For details on how to record 4K burst files, refer to (→107).
1
Select a picture with the [
and press
• The same operation can be performed by touching [
• In the case of recording with [
3
the step
.
2
Drag the slide bar to perform rough scene selection
• For information on how to operate the slide view screen, refer to
(→111).
• If you touch [
scene in the 4K burst playback screen.
3
Drag to select the frame you want to save as a picture
• The same operation can be performed using
4
Touch [
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can bulk save 5 seconds'
worth of 4K recording.
110
Recording with the 4K Photo function and selecting pictures to save
] on the playback screen,
] ([4K Pre-Burst]), proceed to
] (or press the [Fn2] button), you can choose a
] to save the picture
(→216)
].
(→112)
.
4K Photo and Drive Settings
Slide view screen
DVQP1242
Advertisement
Table of Contents
