Advertisement
WARNING
1. DO NOT place objects on top of the device, as objects may
scratch the device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT insert any foreign objects into the device.
4. DO NOT expose the device to strong magnetic or electrical eld.
5. DO NOT use the device in the rain
6. Please check with your Local Authority or retailer for proper
disposaI of electronic products.
7. DO NOT disassemble the device. Only a certi ed service
technician should perform repair.
8. The device has apertures to disperse heat. DO NOT block the
device ventilation, the device may become hot and malfunction
as a result.
Illegal operation may cause personal injury, which could be fatal and may cause
damage to property. For safety, we do not suggest to charge unit and use micro-
phone together.
2
www.PyleUSA.com
CONTROL BOARD FUNCTIONS
1. USB/Micro SD/BT/TWS control board
2. USB and micro SD memory card input jack
3. Master volume control knob
4. 3.5MM AUX input jack
5. 6.5MM microphone input jack
6. Power switch button
7. Input signal
8. Menu button: Short press to select Mic volume (n) or Mic Echo (E) or di erent EQ
e ect (Eq), and then use previous (
9. Battery LED Indicator: When charging, LED indicator will be red, and battery mark
in LED display will ash. After full charged, battery mark in LED display will stop
ashing.
10. DC 9V charge input jack
11. Increase bass e ect button
12. LED mode and switch button
13. Press button (
) is to remove mobile BT connective memo before, you can
connect other device's BT.
) or next button (
) to adjust.
www.PyleUSA.com
3
Advertisement
