Table of Contents
Advertisement
Crossover
1.
Crossover. Selects the low pass filter frequency and is adjustable
from 42Hz to 500Hz.
2.
Variable/LFE toggle. Toggles between using the app to select the
low pass filter frequency and the AV Receiver selecting the low
pass filter frequency.
3.
Slope. Adjusts the slope of the crossover frequency. The higher the
value, the steeper the cutoff.
Phase
1.
Phase. Adjusts the signal delay of the incoming audio signal and
is used to better blend the audio from the subwoofer to other
speakers in the installation.
2.
Variable/AVR Toggle. Toggles between using the app to select
the phase frequency and the AV Receiver selecting the phase
frequency.
11
Nortek Security & Control LLC
Advertisement
Table of Contents
