Furniture of America CM7909F Assembly Instructions

Table of Contents

Download this manual

Assembly Instructions

CM7909F

ASSEMBLY RATING

The Assembly Rating is a 5-point system that

Phillips Screwdriver

shows the degree of effort needed in

(not Included)

assembling a specific product (with 1 being

easy and 5 being difficult). For some

products, two persons are recommended.

DIFFICULT

EASY

2 PERSONS RECOMMENDED

Page 1 of 5

Rev.14-03-03

Table of Contents

Do you have a question about the CM7909F and is the answer not in the manual?

Page 1 Assembly Instructions CM7909F ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that Phillips Screwdriver shows the degree of effort needed in (not Included) assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
Page 2 Page 2 of 5...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 8 pcs Headboard Wood Screw #2 x 1 pc Footboard #3 x 2 pcs Side Rail...
Page 4 Insert the hooks of the side rail (#3) onto the slotted bars of the headboard (#1). Make sure the two hooks are secured properly and then repeat the process for the other side rail (#3) to the other side of Step 1 the headboard (#1).
Page 5 Align the pre-drilled holes on the ends of the slats with the pre- drilled holes on the side rails (#3). Insert a wood screw (#A) onto Step 3 the slat (#4) by using a Phillip screwdriver to secure that slat (#4) to the bed rail (#3).