Custom Program; Secondary Functions - LG WM2801HRA User's Manual & Installation Instructions

Ultra-capacity steamwasher
Hide thumbs Also See for WM2801HRA:
Table of Contents

Advertisement

Available languages

Available languages

CUSTOM PROGRAM

CUSTOM PROGRAM allows you
to store a customized wash cycle
for future use. It allows you to
save favorite temperature, spin
speed, soil level, and other options for a cycle,
and then recall them at the touch of a button.
To store a Custom Program:
1
Select a cycle.
Adjust the Wash/Rinse Temperature, Spin
2
Speed, and Soil Level to the desired settings.
Set any other desired options.
3
Press and hold the CUSTOM PROGRAM
4
button for 3 seconds. You will hear two
beeps to confirm the settings have been
stored.

SECONDARY FUNCTIONS

The special function buttons also activate
secondary functions, including CHILD LOCK,
DRUM LIGHT, and TUB CLEAN. Press and hold
the button marked with the secondary function
for 3 seconds to activate.
CHILD LOCK
Use this option to prevent
unwanted use of the washer or
to keep cycle settings from being
changed while the washer is
operating. Press and hold the PRE WASH button
for 3 seconds to activate or deactivate CHILD
LOCK.
CHILD LOCK will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle.
DRUM LIGHT
The drum is equipped with a blue
LED light that illuminates when
the washer is turned on. This
light automatically turns off when
the door is closed and the cycle starts. To turn
on the light during a cycle, press and hold the
RINSE+SPIN button for 3 seconds. The drum
light will illuminate and then turn off automatically
after 4 minutes.
H O W TO U S E
IMPORTANT: If you press and hold the CUSTOM
PROGRAM button for 3 seconds, you will
overwrite any previously stored CUSTOM
PROGRAM.
To recall a Custom Program:
Press and release the CUSTOM PROGRAM
1
button. The stored settings will be displayed.
2
Press and release the START/PAUSE button
to start the cycle. The washer will start
automatically.
TUB CLEAN
A buildup of detergent residue
can occur in the wash tub over
time and can lead to a mildewy
or musty smell. The TUB CLEAN
cycle is specially designed to remove this
buildup. The display will show a message to add
liquid bleach to the dispenser. Prewash option
will be selected. After the cycle has ended,
open the door and allow the drum interior to dry
completely.
Refer to Care and Cleaning of the Interiorfor
further information.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Steam washer wm2801h*a

Table of Contents