LG MC-766YS Service Manual page 15

H. FAN MOTOR ASSEMBLY REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the leadwire from fan motor, noise filter
and high voltage capacitor.
3) Remove the two screws holding the the suction guide
ASS'Y to the oven cavity and remove the high voltage
diode earth screw.
4) Remove the screw of the capacitor bracket.
5) Remove the two screws holding the fan motor ASS'Y
to the suction guide ASS'Y.
I. HIGH VOLTAGE CAPACITOR AND
DIODE REMOVAL
1) Discharge the high voltage capacitor.
2) Disconnect the leadwire from fan motor, noise filter
and high voltage capacitor.
3) Remove the screw holding the suction guide ASS'Y to
the oven cavity and remove the high voltage diode
earth screw.
4) Remove the screw holding the high voltage capacitor
bracket.
H.V.
Transformer
J. REMOVING THE TURNTABLE MOTOR
1) Remove the turntable.
2) Remove the turntable shaft VERY CAREFULLY
3) Lay the unit down on its back.
4) Remove the turntable motor cover.
The turntable base cover is easily removed by
5) Disconnect the leadwire from the turntable motor
6) Remove the screw securing the turntable motor to
7) After repairing the motor, rotate the removed
8) Fit the turntable motor cover's projecting part to the
NOTE:
1. Remove the wire lead from the turntable motor
2. Be sure to grasp the connector, not the wires, when
Suction
Guide
H.V.
Capacitor
5-5
with a slotted screwdriver.
pinching the six parts with a wire cutting.
terminals.
the oven cavity ASS'Y
turntable motor cover.
base plate slit.
VERY CAREFULLY.
removing.
Turntable Motor
Wire Leads