CMT-X3CD
2-10. SPEAKER UNIT (SP1, SP2)
2 connector
(XP7)
1 connector
(XP6)
– Front bottom view –
3 four screws
(8)
3 four screws
6 speaker unit
(8)
(R-ch) (SP2)
6 speaker unit
(L-ch) (SP1)
5 Remove the speaker wire
from hole of SPK box R assy.
5 Remove the speaker wire
from hole of SPK box L assy.
3 three screws
3 three screws
(8)
(8)
4 Remove the SPK box L block
in the direction of the arrow.
4 Remove the SPK box R block
in the direction of the arrow.
16