Advertisement
OPERATING INSTRUCTIONS
1. Power On / Auto Pairing/Auto-Linking Mode
The first time you power on your ear buds, they will enter pairing mode and attempt to
connect to your Bluetooth device. After that, the ear buds will attempt to auto-link to
the last paired Bluetooth device when powered on.
Auto Pairing/First Time Power ON: Make sure that Bluetooth mode on your device is
on. (refer to your device's instructions if necessary). PRESS and HOLD the
Multi-Function Button (MFB) on the control dongle for about 2 seconds until you hear
the "Power On" voice prompt confirming the power is 'On'. The red and blue LEDs will
flash and a voice pormpt will announce "Pairing". Select "iHome iB82" on your device
to complete pairing.
NOTE: If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter "0000" on the keypad of your device.
You will hear the voice prompt say "Your device is connected", "iHome iB82
Connected" will appear on your device's Bluetooth menu and the LED indicator will
slowly flash blue when you are successfully paired.
You are now ready to begin streaming music wirelessly from your Bluetooth device to
your iHome iB82 Bluetooth ear buds.
Auto Linking: If a device is already paired to your earbuds when powered on, the blue
LED on the unit begins flashing slowly, indicating that your ear buds are in the
Auto-Linking Mode and trying to re-link to a previously paired device as long as that
device is within the normal pairing range of approximately 33-feet. If your ear buds do
not find a previously paired device that is in range and turned 'on' within 3 minutes they
will switch from the Auto-Linking mode to the Power 'Off' mode to extend the battery
life.
2. Power Off
To shut the power 'Off' at any time PRESS and HOLD the Multi-Function Button (MFB)
on the control dongle for about 6 seconds. You will hear the voice prompt say "Power
Off". The red LED flashes three times and then the power shuts off.
3. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be 'Off'' to begin the manual pairing process.
With the ear buds in the 'Off' mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for about 7 seconds. After 2 seconds you will hear the
"Power On" voice prompt, and after another 5 seconds you will hear the "Pairing"
voice prompt and the LED indicator begins alternately flashing blue and red. Release
the Multi-Function Button (MFB). "iHome iB82" will
appear on your device's Bluetooth menu.
Touch "iHome iB82" to complete the pairing process.
4. Connect Ear Buds
The ear buds connect to each other with built-in magnets
in each of the ear buds to keep the buds together around
your neck when you have removed them from your ears.
5. Using Your iHome Bluetooth Ear Buds
The following chart explains the basic functions and operations of your Bluetooth ear buds.
2
Advertisement
