Power source AC 117V/ 60Hz AC 220V /50Hz AC 230V /50Hz AC 240V /50Hz AC 110V/ 220V 60Hz /50Hz AC 110/230V-240V 60Hz/50Hz AC 127V /240V 60Hz /50Hz Dimension 600(L) x 535(D) x 263.5(H)mm Weight Approx 6.3Kg Model No.: MC-6320 Version: 1.0...
Connect the VTVM, oscilloscope and 4 ohm dummy load to the Speaker terminal. Set the Volume Control to max. Position. Set the Signal Frequency as listed in FM Alignment Chart and maintain a sufficient output level to provide an obvious reading. Model No.: MC-6320 Version: 1.0...
" repeat steps 2 and 3 as required " Tune to signal Adjust for max. 90MHz (90MHz) Indication Tune to signal Adjust for max. 106MHz Trimmer of pvc (106MHz) Indication " repeat steps 5 and 6 as required " Model No.: MC-6320 Version: 1.0...
Page 7
Tuning Gang max. Adjust for max. 3.1MHz capacity Indication Tuning gang min. Adjust for max. 12.25MHz capacity Indication " repeat steps 2 and 3 as required " Tune to signal Adjust for max. 3.5MHz (3.5MHz) Indication Model No.: MC-6320 Version: 1.0...
Page 8
Playback track 1 and set volume position to obtain 1V ( 0 dB ) output from the speaker terminal. Playback track 6 and track 18 to read the output level which must within specification – 6dB. Model No.: MC-6320 Version: 1.0...
Need help?
Do you have a question about the MC-6320 and is the answer not in the manual?
Questions and answers