Skoda Superb 2005 Owner's Manual page 254

WARNING (continued)
•
It is important to support the vehicle with suitable supporting
blocks if you wish to work under the lifted vehicle - risk of injury!
Taking off and fitting on wheel
Using the system Safety
After you have slackened the wheel bolts and have raised the car
with the car jack, replace the wheel as follows:
Changing a wheel
– Turn the wheel bolt which is farthest to the top fully out with
Fig. 192 Changing a
wheel: Remove bolts
with hexagon in screw-
driver
– Screw the assembly pin (car tool kit) into the vacant hole
– Unscrew the remaining wheel bolts as described above.
– Take off the wheel.
Fitting on wheel
– Push the spare wheel over the assembly pin.
Driving Tips General Maintenance
the hexagon socket in the screwdriver handle (car tool kit)
and place the bolt down on a clean surface
⇒ fig.
193.
Breakdown assistance
Breakdown assistance 253
Fig. 193 Changing a
wheel: assembly pin
⇒ fig.
192.
Technical Data