Sony ILCE-6600 Help Manual page 175

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600
α6600
ISO Setting: ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher
the sensitivity.
ISO (ISO) on the control wheel → select desired setting.
1
You can also select MENU →
You can change the value by 1/3 EV steps by turning the control wheel. You can change the value by 1 EV
steps by turning the control dial.
Menu item details
Multi Frame NR:
Combines continuous shots to create an image with less noise. Press the right side to display the setting screen, then
select a desired value using the top/bottom sides of the control wheel.
Select the desired ISO number from ISO AUTO or ISO 100 – ISO 102400.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 50 – ISO 102400:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Hint
You can change the range of ISO sensitivity that is set automatically in [ISO AUTO] mode. Select [ISO AUTO] and press the right
side of the control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
You can set the effect level for noise reduction by selecting [NR Effect] under [Multi Frame NR].
Note
When [ File Format] is set to [RAW] or [RAW & JPEG], [Multi Frame NR] cannot be selected.
When [Multi Frame NR] is selected, the flash, [D-Range Optimizer], or [Auto HDR] cannot be used.
When [Picture Profile] is set to other than [Off], [Multi Frame NR] cannot be selected.
When [Picture Effect] is set to other than [Off], [Multi Frame NR] cannot be selected.
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Scene Selection]
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or shooting slow-
motion/quick-motion movies.
When shooting movies, ISO values between 100 and 32000 are available. If the ISO value is set to a value larger than 32000, the
setting is automatically switched to 32000. When you finish recording the movie, the ISO value returns to the original setting.
When shooting movies, ISO values between 100 and 32000 are available. If the ISO value is set to a value smaller than 100, the
setting is automatically switched to 100. When you finish recording the movie, the ISO value returns to the original setting.
The available range for ISO sensitivity varies depending on the setting for [Gamma] under [Picture Profile].
(Camera Settings1) → [ISO Setting] → [ISO].
175