Fitting The Wall Brackets - Polaroid PLA21SB001A User Manual

Fitting the wall brackets

WARNING: Before attempting to fit the Sound Bar to the wall, if you are in
any way unsure about how or where to fit the Sound Bar you should employ a
qualified person to install your Sound Bar.
IMPORTANT: The fittings supplied with your Sound Bar may not be suitable for all
types of wall. Please consult a professional for advice before drilling any holes if
you are in any doubt.
IMPORTANT: Mark the position
on the wall that you want the
Sound Bar to be fitted to and
check that they align with the
holes in the brackets before
drilling any holes.
1. The distance between the outer
holes must be 810 mm with
two more holes 30 mm in from
them. Ensure the four points are
level using a spirit level (A).
2. Drill 4 parallel holes (Ø 3-8 mm
each according to wall type) in
the wall. The distance between
the outer holes must be 810 mm
With two more holes 30mm
in from the outer holes. Firmly
insert a dowel into each hole (B).
3. Slot the screws into the holes in
the brackets. Slot a crosshead
screwdriver through the holes
in the front of the bracket and
tighten the screws into the wall
(C).
8
A
8 1 0
3 0 m
m
B
C
m m
3 0 m
m