Port Configuration; Cli Configuration - Tripp Lite NGI-S05C2POE4 Owner's Manual

6.1.2.

Port Configuration

6.1.2.1. CLI Configuration

Node Command
enable show dot1x port
PORTLISTS
enable configure terminal
configure interface IFNAME
interface dot1x
admin-control-direction
(both|in)
interface dot1x authentication
(disable|enable)
interface dot1x default
interface dot1x guest-vlan
(disable|enable)
interface dot1x max-req <1-10>
interface dot1x port-control
(auto | force-authorized
| force-unauthorized)
interface dot1x reauthentication
(disable|enable)
interface dot1x timeout
(quiet-period|
server-timeout|
reauth-period|
supp-timeout) VALUE
Description
This command displays the current 802.1x
configurations for the specific port.
This command changes the node to configure node.
This command enters the interface configure node.
This command configures the control direction for
blocking packets.
This command enables/disables the 802.1x on the
port.
This command sets the port configuration to default
settings.
This command configures the 802.1x state on the port.
This command sets the max-req times of a port.
(1~10).
This command configures the port control mode on
the port.
This command enables/disables re-authentication on
the port.
This command configures the quiet-period/
server-timeout/re-auth-period/supp-timeout value
on the port.
92