Breville 3X Bluicer Pro Instruction Book page 6

• Do not use blender while
OVERLOAD PROTECTION
is flashing on the LCD. If this
occurs, unplug the blender
and wait for 30 minutes until
the motor has cooled. Once
cooled, you will be able to use
the blender as usual again.
• Do not process hot or boiling
liquids. Allow to cool before
placing into the blender jug.
• To protect against electric
shock, do not immerse the
power plug, cord or appliance
in water or any liquid.
• Authorized Breville Service
Centers can be found on our
website www.Breville.com
• The appliance power rating is
based on the attachment that
draws the maximum power,
other attachments may draw
significantly less power.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
6
BJB815_USCM_IB_E20.indb 6 BJB815_USCM_IB_E20.indb 6 25/9/20 2:28 pm 25/9/20 2:28 pm