Advertisement
Remove the screws with
Screwdriver
Step 3: To remove the shielding(contain the other material );
(3.1) Remove the acetate tapes covering the LVDS/ LED FFCs;
(3.2) Pull out the LVDS/ LED FFCs to separate the base assembly from the unit;
(3.3) Remove the four screws to separate shielding from CB
(3.4) Dismantle the rear cover supporter
HP Restricted
24-07-2012
Dismantle the rear cover first
from the two marked position
Remove the 8pin FFC from main
board then remove rear cover
Remove all tapes
Page 4
Advertisement
