Advertisement
containing refractory ceramic fibers
Components, parts and materials
containing radioactive substances
2.0
Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a
point where components and materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Hex nut screwdriver
3.0
Product Disassembly Process
3.1
List the basic steps that should typically be followed to remove components and materials
requiring selective treatment:
1
Quick release Base stand
2
Strip the screws from rear cover so that the rear metal cover can be removed ,
after be turn back;
3
Strip the five screws from panel holder ;
4
Push up and disassemble the cover from the panel;
5
To remove the shielding(contain the other material );
6
Strip the screws;
7
Release all materials and put some by ESD;
3.2
OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the
locations of items contained within the product which require selective treatment (with descriptions and
arrows identifying locations) can be inserted below:
HP Restricted
24-07-2012
0
Tool Size (if applicable)
PH2
M5
Page 2
Advertisement
