Saving Presets; Options - GFI System SKYLAB REVERB User Manual

7. Saving Presets

If, after entering the Preset-Save scene, you change your mind and would like to exit
without saving any changes, you can do so by :

Holding both buttons again for 2 seconds.

Doing nothing for 5 seconds, you will automatically return to the main scene.

8. Options

- options settings are specified on per/preset basis.
1
2
OR
Tap the MODES button to enter Options menu.
Use the MODES knob/button to navigate around the menu.
Options
1. Kill-Dry
2. Sub-Div
Press and Hold both buttons
~ release the hold when the screen reads:
Tap the left button to save to preset A, or
Tap the right button to save to preset B.
Off
On
1:1 (speed = tapped speed)
1:2 (speed = 2x tapped speed)
1:3 (speed = 3x tapped speed)
1:4 (speed = 4x tapped speed)
5
User Manual
S K Y L A R
REVERB
Save to:
A <-> B