Related Manuals for Soto SOTO-B1
Summary of Contents for Soto SOTO-B1
- Page 1 SOTO-B1 AIR PURIFIER WALL MOUNTED 高 端 空 气 消 毒 机 Operation Manual Before operating the system, please read this manual thoroughly, and retain it for future reference. Top-Grade Air Purifier...
- Page 2 This is SOTO If you have the opportunity to experience SOTO air purifiers, please remember that they are designed with our dreams to meet your expectations...
-
Page 3: Table Of Contents
Contents Consumer Limited Warranty Safety Precautions How it Works Features and Specifications Part Name Installation 10-12 Operation 13-14 Care and Maintenance Troubleshooting... -
Page 4: Consumer Limited Warranty
SOTO shall, at its option, repair or replace the product as specified herein. SOTO will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within one (1) year of the date of purchase. This limited warranty does not cover there placement of expendable or consumable parts such as filters or UV lamps, and other parts subject to normal wear unless they are defective in material or workmanship. -
Page 5: Safety Precautions
Safety Precautions To reduce the risk of electrical shock, fire or injury to person(s) read the following: Running Environment Cautions Use only a 220-240 volt outlet with grounding wire receptacle. Do not use the unit in an enclosed space where oxygen, flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some moth proofing substances. -
Page 6: How It Works
How it Works The air purifier functions as an air cleaner by helping to disinfect airborne microorganisms and removing particulates from the air. The DC fan of the unit draw air through the bottom (Intake) of the unit. Then it passes through the Pre-filter, Electronic cell, HEPA filter, Activated carbon filter and UV lamp + Photo catalytic filter. -
Page 7: Features And Specifications
3. When the filters need to be replaced, simply open the front door and take off the maintenance panel, then pull out the filters and replace a new one in. No screws, hooks or tools are required. Model SOTO-B1 (BK90) Power Requirement 220-240V~, 50/60Hz... -
Page 8: Part Name
Part Name 01- Front door 11- Unit housing 02- Lock 12- UV ballast 03- Key 13- UV light blocker 04- Display panel back cover 14- UV lamp 05- LED display circuit board 15- Photo catalytic filter 06- Fan motor front panel 16- Activated carbon filter 07- Maintenance panel 17- HEPA filter... -
Page 9: Installation
Installation 1. Power supply condition: Use only a 220-240 volt outlet with grounding wire receptacle. 2. Environmental conditions：Temperature：0℃~40℃; Relative humidity：<75%. 3. This product should be installed on the wall near the less activity of indoor personnel. It must be installed on the wall of the load-bearing wall, otherwise it will cause the unit to fall and harm the human body. -
Page 10: Operation 1
Operation 1 Button operation and Display indicator lights 1 POWER Button - Turns the unit On and Off. - Hold the button for 2 seconds, the “ ” indicator light will light up with beeping. In this mode, the panel is locked. If you want to return to the default mode, do the reverse. - Page 11 Operation 2 8 TIMER CYCLE indicator light When this indicator is lighting up, the unit will start to work for 2 hours and stops 0.5 hour automatically, this schedule will repeat itself continuously while in this mode. 9 TIMER indicator light - Displays the current clock time when the unit has no time set.
- Page 12 Operation 3 1 Power (ON/OFF) Button Remote Control Operation The unit will start operating when the POWER button is pressed. Pressing the button again will stop operation. 2 Scheduled operation time Buttons a. The first time press the “TIME” button, the digital clock on the display panel is flashes, calibrate the current time by pressing the "+"...
-
Page 13: Care And Maintenance 1
Care and Maintenance 1 To maintain optimum performance of this air purifier, the Pre-filter and Electronic cell need to be cleaned, and the HEPA filter, Activated carbon filter and the UV lamp need to be replaced. Warning When maintenance on the unit, be sure to unplug the power cord, and never handle the plug with wet hands. If so, electrical shock and bodily injury may occur as a result. - Page 14 Care and Maintenance 2 Warning DO NOT clean the pre-filter and electronic cell with alcohol, gasoline, paint thinner or other flammable substances. It may cause fire! DO NOT reinstall the cell until it is completely dry. If the“ ” indicator light on the control panel flashes, then the cell may still be wet.
-
Page 15: Troubleshooting
Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing the following guide. All other servicing should be done by a SOTO authorized service center. Case What to check... - Page 16 SOTO Air Purification Technology (Langfang) Co., Ltd. Add: Certification Industrial Park, Dachang High and New Technology Development Zone, Langfang City, Hebei Province, China Tel: 400-626-8883 Email: customerservice@soto.com.cn Web: www.sotoairpurifier.com...
Need help?
Do you have a question about the SOTO-B1 and is the answer not in the manual?
Questions and answers