Advertisement
05 - LabSat 2 Installing Software
Configuration and control of the LabSat 2 is performed using the supplied LabSat Software. Before using your LabSat 2
it is necessary to install the software which also contains the USB drivers required for communication. Once this has
been done the USB cables should be connected to the LabSat 2 prior to it being powered, this allows the configuration
of the USB connection from LabSat 2 to the computer.
When you connect to the LabSat 2 via USB for the first time you will be required to install USB drivers, please see the
section 'Connecting LabSat 2 USB' below.
Insert the supplied CD-ROM into the CD drive of your computer. An installation dialog will automatically appear; follow
the onscreen instructions to complete the installation of the setup software.
After installation the CD-ROM can be removed and an icon should have appeared on your desktop that will allow you to
start the LabSat software.
here .
The LabSat 2 software can also be downloaded from
https://en.racelogic.support//Product_Info/LabSat_2/LabSat_2_User_Guide/05_-_LabSat_2_Installing_Software
9
Advertisement
