Table of Contents
Advertisement
Quick Links
Installation and operating Instruction Manual
Model
Voltage
EGD-24M
208/240V
EGD-36M
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this SPECTRUM commercial blender. When used as intended, and with proper
care and maintenance, you are sure to experience years of reliable operation from this equipment. To ensure best
results, it is important that you read and follow the instructions in this manual carefully. It is important to keep
these instructions in a safe place for future reference.
Power
Amperage
4200/5600W 20.2/23.4A
6300/8400W
30/35A
ELECTRIC CounTERTop
GRIDDLES
EGD-24M
EGD-36M
Plug Type
Overall Dimensions
Width
Depth
NEMA
24"
21.7"
L6-30P
(60.9mm)
(55.1mm)
Field-wired
36"
21.8"
(91.4mm)
(55.3mm)
by others
Temperatures
Height
ºC
ºF
12.9"
(32.7mm)
65°C-
150°F-
250°C
480°F
12.9"
(32.7mm)
Advertisement
Table of Contents
Related Manuals for Spectrum Winco EGD-24M
Summary of Contents for Spectrum Winco EGD-24M
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this SPECTRUM commercial blender. When used as intended, and with proper care and maintenance, you are sure to experience years of reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this manual carefully. -
Page 2: Warnings
RépARATIoN, VEuIllEz coNTAcTER WINco. oN pAGe 11. Introduction Congratulations on the purchase of your SPECTRUM machine. Please take time to carefully read through this manual to ensure the machine is operated and maintained properly, to ensure the best possible performance from the product for many years. -
Page 3: Table Of Contents
2. Clean any glue residue left over from the plastic or tape. 3. Place the unit in the desired position and height. SPECTRUM prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free sAve the oRIGINAl box ANd pAckAGING foR use IN of damage. -
Page 4: Installation
3. Place the SPECTRUM Electric Griddle on a firm level surface. Local properly and safely at the work site. By identifying potential problems standards and regulations should be consulted in order to abide by (i.e.: equipment location, ventilation, local fire/electrical codes,... -
Page 5: Operation
TO AVOID SERIOUS PERSONAL INJURY: 6. Remove the excess fat and wipe clean. Griddle surface is ready for use. • ALWAYS install equipment in an area with adequate light and space. NOTE • ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards. -
Page 6: Cleaning, Care & Maintenance
Cleaning, Care & Maintenance you avoid scrapers made from steel wool, as they will damage the To maintain the appearance and increase the service life, clean your unit daily. The Electric Griddle should be plate. Do not use cold water on warm plates, as buckling effect cleaned after each day’s operation;... -
Page 7: Safety
Switch off power and disconnect from the outlet before cleaning. Approved Qualified Service Technician in order to avoid a hazard. Troubleshooting If your SPECTRUM Electric Griddle does not operate, please check the following before placing a service call: Issue mIGht be cAused by... -
Page 8: Exploded View & Parts List
Exploded View & Parts List models eGd-24m & eGd-36m eGd-24m eGd-36m No. description part # part# 1 Feet EGD-MP1 EGD-MP1 2 Set Square EGD-MP2 EGD-MP2 3 Drip Tray EGD-MP3 EGD-MP3 4 Base Board EGD-MP4-24 EGD-MP4-36 5 Indicator light EGD-MP5 EGD-MP5 6 Dial EGD-MP6 EGD-MP6... -
Page 9: Electrical Diagram
The circuit diagrams are provided to assist qualified technicians. Only SPECTRUM agents or Recommended Qualified Technicians Electrical Diagram should carry out repairs if needed. (Refer to page 11 for service arrangements) DO NOT remove any components or service panels on this product. -
Page 10: Limited Warranty
Limited Warranty WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date, whichever date occurs first. - Page 11 Limited Warranty the foReGoING WARRANty pRovIsIoNs ARe A complete ANd exclusIve stAtemeNt betWeeN the buyeR ANd selleR. WINco® NeItheR Assumes NoR AuthoRIzes ANy peRsoNs to Assume foR It ANy otheR oblIGAtIoN oR lIAbIlIty IN coNNectIoN WIth sAId equIpmeNt. Examples of items not covered under warranty, but not limited to just these items: 1.
- Page 12 Models: EGD-24M, EGD-36M www.wincous.com...