Table of Contents
Advertisement
Quick Links
Installation and operating Instruction Manual
EGD-24
SPECTRUM products have undergone strict product testing in order to comply with regulatory standards
and specifications set by international independent, commonwealth and federal authorities.
As testimony to such compliance SPECTRUM products carry the following marks/symbols:
Model Voltage Power (W)
EGD-24 208/240 V
EGD-36 208/240 V 6300/8400W
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of SPECTRUM commercial cooking equipment. SPECTRUM takes pride in the design
and quality of our products. When used as intended and with proper care and maintenance, you will experience years of
reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in
this manual carefully. It's important to save these instructions for future reference.
Amps
4200/5600
20.2/23.4A
30/35A
ELECTRIC CounTERTop
GRIDDLE
EGD-36
C
Dimensions (inches)
Width Depth Height
24"
21.7"
12.9"
36"
21.8"
12.9"
R
US LISTED
Temperatures
0C
0F
65-2500C 150-4800F
65-2500C 150-4800F
Advertisement
Table of Contents
Related Manuals for Spectrum EGD-24
Summary of Contents for Spectrum EGD-24
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of SPECTRUM commercial cooking equipment. SPECTRUM takes pride in the design and quality of our products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. -
Page 2: Warnings
Proper Grounding · Mise à la terre correcte This machine is provided with a three-pronged Congratulations on the purchase of your SPECTRUM machine. Please grounding plug. The outlet to which this plug take time to carefully read through this manual to ensure the machine is connected must be properly grounded. -
Page 3: Table Of Contents
2. Clean any glue residue left over from the plastic or tape. 3. Place the unit in the desired position and height. SPECTRUM prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free sAve the oRIGINAl box ANd pAckAGING foR use IN of damage. -
Page 4: Installation
3. Place the SPECTRUM Electric Griddle on a firm level surface. Local properly and safely at the work site. By identifying potential problems standards and regulations should be consulted in order to abide by (i.e.: equipment location, ventilation, local fire/electrical codes,... -
Page 5: Operation
TO AVOID SERIOUS PERSONAL INJURY: 6. Remove the excess fat and wipe clean. Griddle surface is ready for use. • ALWAYS install equipment in an area with adequate light and space. NOTE • ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards. -
Page 6: Cleaning,.Care.&.Maintenance
Cleaning, Care & Maintenance you avoid scrapers made from steel wool, as they will damage the To maintain the appearance and increase the service life, clean your unit daily. The Electric Griddle should be plate. Do not use cold water on warm plates, as buckling effect cleaned after each day’s operation;... -
Page 7: Safety
Switch off power and disconnect from the outlet before cleaning. Approved Qualified Service Technician in order to avoid a hazard. Troubleshooting If your SPECTRUM Electric Griddle does not operate, please check the following before placing a service call. Issue mIGht be cAused by... -
Page 8: Exploded.view
Exploded View & Spare Parts List model eGd-36 model eGd-36 No. description part # 1 Griddle Plates Assy EGD-36-P1 2 Heating Element EGD-36-P2 3 Hardware Assembly EGD-36-P3 4 Insulation EGD-36-P4 5 Insulation Plates EGD-36-P5 Ceramic EGD-36-P6 Connector - 1 Ceramic EGD-36-P7 Connector - 2 7 Plug &... -
Page 9: Spare.parts.list
EGD-24-P7 8 Thermostat EGD-24-P8 9 Main Body Assy EGD-24-P9 10 Insulation Plates EGD-24-P10 11 Insulation EGD-24-P11 12 Hardware Assembly EGD-24-P12 13 Heating Element EGD-24-P13 14 Griddle Plates Assy EGD-24-P14 15 Plug & Lead EGD-24-P15 16 Connection Box EGD-24-P16 17 Connector Bar... -
Page 10: Electrical.diagram
The circuit diagrams are provided to assist qualified technicians. Only SPECTRUM agents or Recommended Qualified Technicians Electrical Diagram should carry out repairs if needed. (Refer to page 11 for service arrangements) DO NOT remove any components or service panels on this product. -
Page 11: Limited.warranty
Limited Warranty WINCO warrants to the original purchaser of new equipment that said Proof of purchase is required to extend warranty more than 1 year from equipment, when installed in accordance with our instructions within date of shipment from the factory. North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year.