Advertisement
Quick Links
User Instruction Manual
Vertical Lifelines
This manual is intended to meet the Manufacturer's
Instructions as required by ANSI Z359.1
CSA Z259.2.1 and should be used as part of an employee
training program as required by OSHA.
WARNING: This product is part of a personal fall arrest or
restraint system. The user must follow the
manufacturer's instructions for each component of the
system. These instructions must be provided to the user of
this equipment. The user must read and understand these
instructions before using this equipment.
Manufacturer's instructions must be followed for proper use
and maintenance of this equipment. Alterations or misuse of
this equipment, or failure to follow instructions, may result in
serious injury or death.
WARNING: Record the product identification information
from the ID label in the inspection and maintenance log in
Section 10 of this manual.
DESCRIPTIONS
Advanced Safety Solutions Inc. Vertical Lifelines are available
in various styles and configurations.
Following are descriptions of typical lifelines and lifeline
subsystems. Your model may not be described exactly as
configured.
Vertical Lifeline Assemblies:
50-2: 5/8 inch polyester/polypropylene rope, snap hook at
each end, 50 feet long
Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750
Advertisement
Related Manuals for Advanced Lifeline 50-2
Summary of Contents for Advanced Lifeline 50-2
- Page 1 Following are descriptions of typical lifelines and lifeline subsystems. Your model may not be described exactly as configured. Vertical Lifeline Assemblies: 50-2: 5/8 inch polyester/polypropylene rope, snap hook at each end, 50 feet long Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 2 Restraint systems typically include a full body harness and a lanyard to prevent the user from reaching a fall hazard (leading edge roof work). No vertical free fall permitted. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 3 C. FALL CLEARANCE: Ensure that adequate clearance exists in your fall path to prevent striking an object. The amount of clearance required is dependent on the type of connecting Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
-
Page 4: System Requirements
IMPORTANT: The type of lifeline used is dependent upon the application and compatibility requirements of other system Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750... - Page 5 NOTE: Large throat opening snap hooks should not be connected to standard size D-rings or similar objects which will result in a load on the gate if the hook or D-ring twists or Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 6 Per OSHA 1926.500 and 1910.66: Anchorages used for attachment of personal fall arrest systems shall be independent of any anchorage used to support or suspend Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
-
Page 7: Operation And Use
Pregnant women or minors must not use Eagle Industrial Tools Vertical Lifelines or subsystems. BEFORE EACH USE of this equipment, carefully inspect it according to steps listed in section 5.0 of this manual. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750... - Page 8 Synthetic rope is subject to elongation, or stretch. As the distance between the anchorage and the grab increases, the portion of the vertical lifeline that is subjected to loads Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 9 G. RESCUE: The employer must have a rescue plan and the ability to implement it. H. AFTER A FALL: Components which have been subjected to fall arrest forces must be removed from service and destroyed. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 10 Connectors attached to synthetic rope lifelines must be attached using a spliced eye termination and thimble. The splice must be made with 5 tucks. The connection must support 5,000lbs. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 11 Some knots reduce lifeline strength fifty percent or more. IMPORTANT: If the user splices or forms end terminations, proper procedures must be followed to ensure compatibility in size, shape, and strength. Advanced Safety Solutions Inc. is not responsible for subsystems not manufactured by Advanced Safety Solutions Inc.
- Page 12 WARNING: If this equipment has been subjected to fall arrest forces remove from service and destroy. IMPORTANT: Extreme working conditions (harsh environments, prolonged use, etc.) may require increasing the frequency of inspections. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 13 Step 5. Record the inspection date and results in the inspection log in Section 10. If inspection reveals an unsafe or defective condition, remove equipment from service and destroy, or contact an authorized service center for repair. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
-
Page 14: Specifications
3 strand rope is 7000 lbs. The melting point is 330 degrees Fahrenheit HARDWARE SPECIFICATIONS: Snap Hook: Drop forged, Carbon steel self-locking snap hook, 5,000 lbs. (22.2 kN). Tensile strength. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750... - Page 15 LABELING All Labeling must be present and fully legible. Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
- Page 16 Inspection Date Inspection Corrective action Maintenance items noted performed Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750...
Need help?
Do you have a question about the Lifeline 50-2 and is the answer not in the manual?
Questions and answers