Table of Contents
Advertisement
4. [ For CD and MP3 disc only ] When music is playing, press and hold the
buttons to fast-forward or fast-rewind search through the current track.
Folder searching
In MP3 disc stop mode, press the FOLDER UP (+) or FOLDER DOWN (-) button to skip
to next / previous folder.
+10 track searching
Press the +10 track button to search by advance 10 track per step if the track is far away
from menu selection.
In CD / CD+G / MP3 disc playing mode,
1. To repeat the current track, press the PLAY MODE button once. The REPEAT 1
1
indicator
function is turned off.
2. To repeat folder playing (for MP3 disc only), press the PLAY MODE button twice, the
REPEAT FOLDER indicator
on the disc will be played repeatedly.
3. To repeat all the tracks, repeatedly press the PLAY MODE button until the REPEAT ALL
A
indicator
4. To clear the repeat function, press the PLAY MODE button again. The REPEAT OFF
indicator
In CD, CD+G or MP3 disc stop mode, use the PLAY MODE/PROGRAM button to program
and play back songs in a pre-selected order.
Note: Programming can be done in the stop mode only.
1. Press the PROGRAM (PROG) button. The PROGRAM SET mode "PROG SET 01: 01"
will show in the monitor, last two digits of track number indicator are flashing to prompt
for input.
2. Press the
/
the +10 track button if the track is far away from menu selection. If folder selection is
required, press the FOLDER+ (UP) or FOLDER- (DOWN) button to skip to next or
previous folder.
Notes: Folder selection for MP3 disc only.
3. Press PROGRAM button to confirm entry. Program counter advance to "02" and flashing
with programmed track number again.
4. You can repeat the steps 2 & 3 up to a maximum of 20 tracks. When maximum of 20
tracks have been programmed, "PROG FULL" message appears briefly in the monitor
and then "PROG" mode icon shows in the monitor steadily.
5. Press
PLAY/PAUSE button when you have completed programming to start playing.
You are now ready to start singing along.
6. Press STOP button twice or open the CD COMPARTMENT COVER to clear all the
programmed entries.
for MP3 disc only
CD/CD+G/MP3 DISC REPEAT OPERATION
will show in the monitor. The track will continue to play until the repeat
show in the monitor. All the tracks on the disc will be played repeatedly.
will show in the monitor.
CD/CD+G/MP3 DISC PROGRAM OPERATION
SKIP buttons forward or back to select a desired track number. Press
D
will show in the monitor. The tracks of selected folder
13
/
SKIP
Advertisement
Table of Contents
