Problems During Calls - Motorola razr User Manual

Fix a problem : Call and SIM issues
4. Is your phone connected with a
5. If you're using a ringtone that you installed, try using a ringtone that came with the phone.
6. Use safe mode to see if apps you installed are causing the issue and uninstall as needed. Begin with
application types like launchers, task killers, or anti-virus apps.
Can't answer ringing phone
1. Clear the data for the Phone app.
Touch & hold
Consistent busy signal
Outbound calls
1. If you hear a fast busy signal when you call a number, all cellular circuits may be in use, preventing the
call from going through. Try calling again later.
2. If you hear a fast busy signal every time you call the same number, your number may be blocked by an
app. Try calling from a different number.
Incoming calls
If you have a signal and can make calls, but callers tell you they consistently get a busy signal when calling
you, check that you haven't

Problems during calls

After each troubleshooting step, check to see if your issue is fixed.
Screen goes black
1. Check your proximity
Dial a call and set the phone on a table (don't use speaker mode), then hold your hand over the
proximity sensor to see if you can turn the screen off and on.
2. Use safe mode to see if apps you installed are causing the issue and uninstall as needed.
Calls are dropping
1. Check your signal strength:
•
Weak signal from your cellular provider is a common cause of dropped calls. In the
how many bars your network connection has. If you see only one or two bars, change locations to
improve your signal strength, particularly if you are indoors.
2. Turn your phone off and then on again.
Press and hold the Power button, then touch Power off. Then turn it on to establish a new connection
with the network.
3. During a call, check that the
screen, preventing accidental touches during calls. You can also download an app to automatically lock
your screen during calls; search for "call screen lock" on Play Store.
4. Use safe mode to see if apps you installed are causing the issue and uninstall as needed.
Bluetooth
, then touch > Storage & cache > Clear storage.
blocked their
sensor.
proximity sensor
device? If so, all audio is routed to the Bluetooth device.
numbers.
works by covering it to confirm that it turns off your
188
status bar, see