Advertisement
7.
Connect the appliance with the power source, the first indicator (the default
grinding time Setting) lights at 100% brightness while the other indicators and the
indicator of Start/Stop button light at 50% brightness.
Select your desired grinding time by following the previous step and the table.
8.
Press the Start/Stop button, the appliance starts to grind coffee bean under the
selected grinding time. The coffee powder dispenses from the coffee powder outlet.
The indicator of Start/Stop button keeps blinking during grinding process.
Note:
The appliance will enter into the sleep state if no operation within 90 seconds after
plug in.
The appliance must rest for 30 minutes if it is operated for 5 minutes continuously.
And it is suggested to operate this appliance for less than 90s per time and minimum
90 seconds rest time must be maintained between continuous two cycles.
You can press Start/Stop button to make the appliance stop running at any time
during grinding process.
9.
When desired grinding time has reached, the coffee grinder will stop working
automatically and go back to standby condition, at that time, the first indicator (the
default grinding time setting) lights at 100% brightness while the other indicators
and the indicator of Start/Stop button light at 50% brightness.
Note:
The maximum amount of ground coffee container is 150g, make sure the coffee
ground shall not overflow.
10. Unplug the appliance, remove the ground coffee container lid and pour out the
coffee ground directly.
Note:
If there is resistance while adjusting, the grind size should be adjusted while the motor
is running to prevent jamming.
Advertisement
