Advertisement
Note:
The bean hopper is equipped with micro switch so that it must be assembled in
correct before operating or the appliance will not work.
If it is not working, disassemble and re-assemble.
3.
Pour appropriate amount of coffee beans into the bean hopper, and close the lid.
The quantity of coffee beans shall not exceed 360g.
Note:
If you run the appliance without coffee beans, the appliance will stop working after
running for about 5 minutes. The appliance must rest for 30 minutes if it is operated
for 5 minutes continuously.
4.
Put the ground coffee container (with lid in position) on the ground coffee container
holder. Ensure that the opening of the ground coffee container aligns with the
coffee powder outlet.
5.
Turn the strength control dial to select your desired coffee strength. Turn it to the
right, the coffee strength will be increased while it will be decreased when turn the
strength control dial to the left.
6.
The coffee-dispensing amount is determined by grinding time; you can turn the
click-wheel to select your desired grinding time. When select, the corresponding
indicator of your selected grinding time will light at 100% brightness. If you do not
want to adjust the grinding time, the appliance will work under the default grinding
time.
Illuminated
1
indicator
light
(default
(from left
setting)
to right)
Grinding
5
time
minutes
Note:
The first indicator light at 100% brightness means manual mode, please use another
container. Powder cup grinding 50 seconds at most the Coarse grind.
2
3
10 mins
20 mins
4
5
30 mins
40 mins
6
50 mins
Advertisement
