Kogan SMARTERHOME KABODANWHTA User Manual page 14

o
o
o
o
o
•
If the user is not recognised, only the weight value is shown on the scale's
display. In this case, the "Er" message does not appear on the scale's display.
Weight Only Operation
The scale will also operate as a standard weight-reading scale.
1. Place the scale on a flat, hard surface. A firm floor covering is required for correct
measurement.
2. Step on to the scale wearing shoes. Ensure that you are standing still with equal
weight distribution.
3. The scale immediately begins to measure your weight. The scale will display the
weight value first and then the "Er" message appears on the scale's display unit.
4. If a user profile has been created in the app then the BMI, BMR and AMR are
displayed.
5. If the user is not recognised, the scale will display the weight value. In this case, the
"Er" message does not appear on the scale's display unit.
Note: Use the measurements displayed on the scale for further
observations.
Turning Off the Scale
•
After you have stepped off the scale, the scale will automatically turn off after a
few seconds. The data transferring to app continues even after the scale is off.
•
After the measurement, if the user does not step off, the scale will turn off in 120s. If
the app sends command asking the scale turn off, it will turn off.
•
When the scale stays at 0.0kg and is idle, it will turn off in 30's. If the weight on the
scale is not stable, the scale will turn off in the 30's.
Replacing Batteries
The scale is equipped with a "low battery" indicator. If you operate the scale with flat
batteries, "Lo" will appear on the display and the scale will automatically turn off. In this
case, the batteries must be replaced with the 4 x 1.5 V AAA batteries.
Note:
•
When changing batteries, always use batteries of the same type, brand,
and capacity.
•
Do not use rechargeable batteries.
•
Use batteries that are free of heavy metals.
Water content in %
Basal metabolic rate in kcal
Visceral in number
Bone mass in kg
Muscle ratio in %