Table of Contents
Advertisement
2.5 2.5" SATA HDD Installation
You can install one 2.5" SATA SSD/HDD inside the system.
1.
Make sure the system is power-off and remove the housing cover.
2.
Use the provided screws to secure the HDD on the HDD holder.
3.
Pull the release lever of the HDD bracket outward. Place the HDD into the HDD bracket and
slide the HDD into the bracket firmly.
4.
Connect the HDD SATA cable to the SATA port.
8
eIVP-CFS-AI-D0000 AI Box
Advertisement
Table of Contents
