Helpful Information - LG UT48ACP Owner's Manual

Operating Instructions
Forced Operation
Operation procedures when the remote control can't be used.
Press the tact switch (Forced operation) for 2 seconds.
If you want to stop operation, press again the tact switch.
In case the power comes on again after power failure on the
Forced Operation mode, the operating conditions are
automatically set as follows:
During Forced Operation, the initial mode continues.
Operating mode
Indoor FAN Speed
Setting Temperature
Auto Restart Function
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.

Helpful information

Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
26 Cassette-Type Air Conditioner
Cooling Model
Cooling
High
22°C
Heat pump Model
Room Temp. set Temp.-2°C Room Temp. < set Temp.-2°C
Cooling
set available
set available
High
Speed
Forced operation
(Tact switch)
Heating
set available
set available