Page 1
Firmware Update Instruction Manual This manual guides you through downloading the latest LW-Z5010 Series firmware from Epson website, and updating the firmware of your LW-Z5010 Series. Important! Settings is erased due to the update. During the update, be sure to use the AC adapter to supply the power to the printer instead of using the lithium-ion battery.
Page 2
Make sure your OS version is one of the following. Windows 7 (32bit/64bit) Windows 8 (32bit/64bit) Windows 8.1 (32bit/64bit) Windows 10 (32bit/64bit) Download the Firmware Updater Download “UpdaterLWZ5010V103A.exe” from Epson website, and save it to your desktop. https://labelworks.epson.com/epson-labelworks-lw-z5010px-firmware...
2. Firmware Update Procedure Follow the procedure below to update the firmware of your LW-Z5010 Series. 1. Put the LW-Z5010 Series into “update” mode Press and hold , then press to turn on the printer in the “update” mode. How to confirm that the printer has entered in the update mode A title “Firmware Update”...
Page 4
Click [OK]. Firmware update is started. A screen to show that the update is in progress is displayed during the update. It takes about 5 to 10 minutes to complete the update, however, it may take longer depending on the computer environment. Click [OK].
Page 5
Check if the USB cable is firmly connected to the printer and the computer. Then retry the update. >> Update the firmware LW-Z5010 Series is not connected. Put your LW-Z5010 Series into “update” mode, and then connect it to the computer.