LG ARNU07GB1G1 Owner's Manual page 10

Operating Instructions
Wireless Remote Controller (optional)
5
6
4
2
7
ON
11
8
13
14
15
PQWRHSF0(Heat pump)
PQWRCSF0(Cooling only)
10 Indoor Unit
Signal transmitter
1
3
10
CANCEL
9
OFF SET
17
AUTO CLEAN
12
16
Flip-up door
(opened)
1. Start/Stop Button
Operation starts when this button is pressed.
2. Operation Mode Selection Button
Used to select the operation mode.
3. Room Temperature Setting Buttons
Used to select the room temperature.
4. Indoor Fan Speed Selector
Used to select fan speed in four steps low, medium,
high and Chaos.
5. Jet Cool (Not available)
Speed cooling/heating operates super high fan
speed.
6. Chaos Swing Button (Not available)
Used to stop or start louver movement and set the
desired up/down airflow direction.
7. On/Off Timer Buttons
Used to set the time of starting and stopping
operation.
8. Time Setting Button
Used to adjust the time.
9. Timer Set/Cancel Button
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10. Sleep Mode Auto Button (Not available)
Used to set Sleep Mode Auto operation.
11. Air Circulation Button
Used to circulate the room air without cooling or
heating.
12. Room Temperature Button
Used to set the desired horizontal airflow
direction.
13. Plasma (Optional)
Used to start or stop the plasma-purification
function.
14. Horizontal Airflow Direction Control Button
(Not available)
Used to set the desired horizontal airflow
direction.
15. Reset Button
Initialize remote controller.
16. 2nd F Button
Used prior to using modes printed in blue at the
bottom of buttons.
17. Auto Clean (Not available)
Used to set Auto Clean mode.