Fujitsu PRIMERGY RX2540 M4 Operating Manual page 23

Interfaces
USB connectors
USB connectors
(10 HDD variant)
Graphics (15-pin)
Serial (9-pin)
LAN / Ethernet
Management LAN
(RJ45)
Onboard or integrated controllers
RAID controller
SATA controller
LAN controller
Remote
Management
Controller
Trusted Platform
Module (TPM)
RX2530 M4
USB 3.0 connectors: 4 (2x front, 2x rear)
USB 2.0 connectors: 1 (1x on front panel QRL)
USB 3.0 connectors: 2 (2x rear)
1x VGA (rear)
1x front VGA as an option (not for 10 HDD variant)
1 x serial RS-232-C, usable for iRMC S5 or system or
shared
OCP option:
– 4x 1 Gb
– 2x 10 Gb
– 2x 10 Gb SFP+
– 4x 10 Gb SFP+
1 x dedicated management LAN connector for iRMC S5
(10/100/1000 Mbit/s). Management LAN traffic can be
switched to shared onboard Gbit LAN port.
Modular Host Bus Adapter with "Integrated RAID" (IR).
RAID levels 0 and 1 are supported for internal HDD
configurations.
®
Intel C620, 1 x SATA channel for ODD
OCP based on Emulex XE100 series;
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot
(also diskless).
Integrated Remote Management Controller (iRMC S5),
256 MB DDR3-800 SRAM for video, IPMI 2.0
compatible
Infineon / separate module; TCG V1.2 or TCG 2.0
compliant (option)
Operating Manual
Functional overview
23