Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SPM Airius II LTE-M
Summary of Contents for SPM Airius II LTE-M
- Page 1 QUICKSTART Airius II LTE-M i n f o @ s p m i n s t r u m e n t . s e...
-
Page 2: Table Of Contents
Setting up vibration measurements in Condmaster.NET ......9 Replacing battery ..................10 SPM Instrument AB | Box 504 | SE-645 25 Strängnäs | Sweden Technical data subject to change without notice. Tel +46 152 225 00 | info@spminstrument.se | www.spminstrument.com ISO 9001 certified. -
Page 3: Technical Specifications
Part numbers MOD1YC One year of additional data for AIR15** AIR14-01 Airius II LTE-M, battery powered, incl. subscription MOD3YB Three years of additional data for AIR14** with 3 years of data**, 10-1000 Hz, 2/4/8 g MOD3YC Three years of additional data for AIR15** AIR14-10 Airius II LTE-M, battery powered, incl. -
Page 4: Mechanical Installation, Airius Vibration Sensors
Mechanical installation, Airius vibration sensorS Ø 30 mm There are two ways to mechanically install Airius vibration sensors, either by screw installation or glue installation. Screw installation is recommended, if possible. Position the sensor so that the sensor performs measurements in an optimal manner while having good LTE-M signal strength. -
Page 5: Setting Up Airius
Setting up Airius Airius II LTE-M is configured and linked to the subscription and Condmaster license when shipped from SPM Instrument, which means no setup other than the following is required to get started with Airius II LTE-M sensors: 1. Perform the mechanical installation, see Mechanical installation, Airius vibration sensors. - Page 6 s p m i n s t r u m e n t . c o m |...
-
Page 7: Setting Up Vibration Measurements In Condmaster Ruby
Setting up vibration measurements in Condmaster Ruby 1. Go to Graphical Overview > View as tree. 2. In the tree structure to the left, expand Components. 3. Right-click Components, choose Create, and click Component. 4. Enter component number and name. 5. - Page 8 s p m i n s t r u m e n t . c o m |...
-
Page 9: Setting Up Vibration Measurements In Condmaster.net
Setting up vibration measurements in Condmaster.NET 1. Open Condmaster.NET and log in. If required, select database. 2. Click Settings. 3. Click Components. 4. Click Add. 5. Fill in the component details. 6. Click Create. 7. Click Measuring points. 8. Click Add. 9. -
Page 10: Replacing Battery
REPLACING battery When replacing the battery, appropriate ESD protection measures must be taken. 1. Loosen the four screws and carefully position the lid so it does not interfere with the battery replacement. The lid is attached to the antenna cable that 0.5 Nm is attached to the circuit board at the other end. - Page 11 This product must be disposed as electronic waste and is marked with a crossed-out wheeled bin symbol in order to prevent it being discarded with household waste. When the life cycle of the product is over You can return it to Your local SPM representative for correct treatment, or dispose it together with your other electronic waste.
- Page 12 s p m i n s t r u m e n t . c o m |...
Need help?
Do you have a question about the Airius II LTE-M and is the answer not in the manual?
Questions and answers