8.4 Blade Bolt Inspection
Inspect Blade Bolt Head daily for wear as followed:
Inspect the Blade Bolt Heads daily for abnormal wear. REPLACE BOTH BLADE BOLTS on
DANGER
the Blades IMMEDIATELY if either blade bolts has:
•
Visible cracks or
•
If the recessed area on blade bolt is worn off or
•
If Blade Bolt has gouges or chipped areas.
Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of
the broken part which may cause serious bodily injury or death.
Always replace Blade Bolts with new bolts whenever replacing the Blades. OPS-U-0037
3510 / 13510 Rotary Cutter
© 2021 Alamo Group Inc.
OPERATION
12/21
Operation Section 4-25