How Do I Install Miomore Desktop Onto My Computer - Mio Moov R503T User Manual

How do I install MioMore Desktop onto my computer?

CAUTION: Before you begin, ensure that your computer meets the minimum system requirements for MioMore Desktop,
especially:
Ensure that Internet Explorer 6 or higher is installed on your computer before you install MioMore Desktop, even if it is

not your default browser.
Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install MioMore

Desktop.
1. Close all programs on your computer.
2. Insert the MioMore Desktop Application Installer DVD into your computer DVD drive.
The MioMore Desktop installer will start.
If your computer does not automatically launch the DVD, start the installation manually:
Start  Run.
Type D:\Install.exe where "D" is the letter assigned to your DVD drive, then click OK
3. Select your preferred language for MioMore Desktop.
Click Install Software  Install MioMore Desktop 2008.
4.
5. Follow the screen prompts to install MioMore Desktop:
Review and accept the Licence Agreement for MioMore Desktop when prompted.

Select a destination folder for MioMore Desktop when prompted.

When the installation has finished, click Finish. MioMore Desktop will open.

6. If prompted to connect your Mio to your computer, complete the following:
Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and

plug the small end into the USB Socket on the
Tip: Where possible, plug the USB cable into a USB port at the back of your computer.
Push the Power switch to the ON position, to turn on your Mio.

The following screen will display on your Mio.
7. If prompted to update your Mio software, follow the on-screen prompts.
You are now ready to use MioMore Desktop to install maps to your Mio.
bottom of your Mio.
93